-!- Irrsi  Log opened Sat Jul 27 00:00:44 2002
-!- Irrsi  Day changed Sat Jul 27 2002
[00:00] < huebi> oversize: ja, wie ist denn nun deine / part.
[00:00] < oversize> part1
[00:00] < th> _NULL: naeh
[00:01] < _NULL> th: dann halt ned. ist doch auch egal.
[00:01] < huebi> oversize: whole path, please
[00:01] < th> _NULL: hoer auf zu allem egal zu sagen
[00:02] < _NULL> th: warum denn?
[00:02] < oversize> oh /dev/ide/host0/bus0/target0/lun0/part1
[00:02] < th> _NULL: weil es demotivierend ist
[00:02] < _NULL> hmm. pardon
[00:04] < tsa> egal.
[00:04] < tsa> ;)
[00:05] < _NULL> tsa: schon angesteckt mit dem "egal-virus", eh?
[00:06] < tsa> weiss nicht...egal
[00:06] -!- WKaibigan [~Aloicious@ACB4DE18.ipt.aol.com] has quit ()
[00:06] < tsa> *grins*
[00:06] < _NULL> :P
[00:06] < Mike1> LocalHero: i need a username and password to test your forum, where do i create it?
[00:08] < esden> hmm ...
[00:13] < huebi> re
[00:14] < huebi> oversize: 1. line in your /etc/lilo.conf must be:
[00:14] < huebi> boot=/dev/ide/host0/bus0/target0/lun0/disc
[00:16] < oversize> k, it is ...
[00:17] < huebi> delay=40
[00:17] < huebi> image=/boot/vmlinuz
[00:17] < huebi>         label=rock
[00:18] < huebi>         append="/dev/ide/host0/bus0/target0/lun0/part1"
[00:18] < huebi>         read-only
[00:18] < huebi>
[00:18] < huebi> and then:
[00:18] < huebi> lilo
[00:18] < huebi> then it should boot
[00:18] < huebi> stop
[00:19] < huebi> append="root=/dev/ide/host0/bus0/target0/lun0/part1" <- korrekt
[00:19] < oversize> the append was missing.. i l try it now again
[00:19] < huebi> oversize: Viel erfolg
[00:19] < oversize> danke 8)
[00:26] < oversize> its booting... thx
[00:32] -!- ge0rg is now known as Ge0rG
[00:32] < th> hi Ge0rG
[00:32] < huebi> oversize: pleasure ;-)
[00:33] < Ge0rG> moin
[00:43] < th> Ge0rG: hast du noch irgendwas 4231-maessiges getan?
[00:43]   _NULL hat kein dvd-lw, sondern einen rasenmaeher... dem sound nach zu urteilen... :-/
[00:43] < Ge0rG> th: bis jetzt noch nicht krups gebootet
[00:44] < th> Ge0rG: dann aber husch
[00:45]   Ge0rG musste sozialen pflichten nachgehen
[00:45] < th> du immer mit deinen sozialen pflichten
[00:47] < Ge0rG> krups:~# modprobe cs4231
[00:47] < Ge0rG> /lib/modules/2.4.18/kernel/drivers/sbus/audio/cs4231.o: unresolved symbol ebus_chain
[00:47] < th> Ge0rG: grmpf.
[00:47] < th> Ge0rG: also:
[00:47] < th> Ge0rG: editiere
[00:47] < th> drivers/sbus/audio/cs4231.c
[00:47] < th> -#if defined(CONFIG_PCI) && defined(CONFIG_SPARC64)
[00:47] < th> +#if defined(CONFIG_PCI) && ( defined(CONFIG_SPARC64) || defined(CONFIG_SPARC32))
[00:49] < Ge0rG> in drivers/sbus/audio/cs4231.c gibt es keine zeile mit SPARC64
[00:49] < th> #define EB4231_SUPPORT
[00:49] < th> ?
[00:50] < th> Ge0rG: welche version?
[00:50] < Ge0rG> #ifdef CONFIG_PCI
[00:50] < Ge0rG> #define EB4231_SUPPORT
[00:50] < Ge0rG> 2.4.18
[00:50] < th> Ge0rG: nimm mal 19rc3
[00:50] < Ge0rG> th: hast du damit messbaren erfolg gehabt?
[00:51] < th> Ge0rG: ich komme zumindest ueber die unresolved symbols
[00:51] < th> Ge0rG: danach finde ich am ebus aber keinen soundchip
[00:51] < Ge0rG> zu einem IO-error
[00:51]   Ge0rG muss sich mal mit anderen dingen befassen.
[00:52] < th> das ist nicht wirklich ein io-error
[00:56] < th> Ge0rG: hattest du eigentlisch schon sound-playback auf der dbox hinbekommen?
[00:56] < Ge0rG> th: mit aktuellem CDK geht das, auch wenn man 48khz oder sowas ausgeben muss
[00:57] < th> 48khz ausgeben?
[00:58] < Ge0rG> es werden nicht alle ioctls unterstützt.
[00:58] < th> was hat das fuer einen nachteil?
[00:58] < Ge0rG> man kann die bitrate nicht ändern
[01:00] < th> wofuer waere das sinnvoll?
[01:00]   th ist ein sound-laie ;)
[01:01] < Ge0rG> th: um eine audiodatei mit der richtigen geschwindigkeit und frequenz wiederzugeben
[01:02] < th> dann ist das abspielen von mp3s also nicht vernuenftig moeglich
[01:03] < Mike1> LocalHero: i need a username and password to test your forum, where do i create it?
[01:03] < Ge0rG> th: doch, wenn du madplay um eine frequenz-skalierung erweiterst.
[01:04] < Ge0rG> th: oder wenn du 48khz-mp3s nimmst ;)
[01:04] < chrisime> lalala
[01:04] < th> ich glaub unter 128 hab ich keine
[01:04]   chrisime hat n cooles amiga module gefunden
[01:05] < Ge0rG> th: das sind kbit, keine khz.
[01:05] < th> oh
[01:05] < th> dann sind meine alle 44khz
[01:05] < th> IIRC
[01:06] < chrisime> https://slashdot.org/articles/02/07/26/1535218.shtml?tid=109  <-- heheh
[01:07] < Ge0rG> th: das ist ein problem, ja.
[01:08] < Ge0rG> th: ich hab mpeg2-ströme, die 48khz haben.
[01:08] < th> Ge0rG: kann man die nicht transcodieren?
[01:08] < Ge0rG> müsste man mal ausprobieren *dboxboot*
[01:13] < Ge0rG> th: mpeg2 mit 48khz wird ordentlich abgespielt.
[01:14] < th> Ge0rG: hast du neustes cdk da?
[01:14] < th> Ge0rG: war das rootfs auch im cdk?
[01:14] < th> zu lange her :-/
[01:15] < Ge0rG> th: das rootfs wird aus dem CDK erzeugt
[01:15] < Ge0rG> bzw. dient das cdk u.a. dazu, das rootfs zu erzeugen.
[01:16] < th> Ge0rG: das tat ich crosscompilen, nicht wahr?
[01:17] < Ge0rG> th: genau. du checkst das CVS aus, machst configure, make und schon hast du 'n rootfs ;)
[01:17] < Ge0rG> naja, es ist fast so einfach...
[01:17] < th> Ge0rG: und wo krieg ich den crosscompielr her?
[01:18] < Ge0rG> u.a. muss man 100mb downloaden
[01:18] < Ge0rG> th: den zieht sich das make-script
[01:18] < Ge0rG> kannst aber auch alles von mir haben
[01:20] < th> Ge0rG: /cdkroot sieht aber schon nach rootfs aus
[01:20] < Ge0rG> th: das ist eins. aber wohl ein altes.
[01:20] < Ge0rG> oder meinst du auf bender?
[01:21] < th> nein
[01:21] < th> Ge0rG: das was ich im cvs auschecken muss sind die 100mb?
[01:21] < th> Ge0rG: hast du mal infos ueber cvs daten?
[01:21] < Ge0rG> th: du checkst im CVS die cdk-spezifischen sourcen aus, die 100mb werden danach wget'ted
[01:21] < th> aha
[01:22] < Ge0rG> "cvs -z3 -d:ext:ge0rg@cvs.tuxbox.berlios.de:/cvsroot/tuxbox co ." war mein befehl zum auschecken
[01:22] < Ge0rG> gestartet in /dbox2/cvs/ gab das ein paar subdirs
[01:22] < Ge0rG> davon hab ich einige aus /dbox2/cvs/ nach /dbox2/cvs/cdk/ verschoben, und cdk/ nach /dbox2/
[01:22] < Ge0rG> komplizierte manipulationen, nicht?
[01:23] < th> Ge0rG: d.h. fuer schnelles builden sollte IO performance darin gut sein?
[01:23] < Ge0rG> th: für die 100mb?
[01:23] < huebi> My DVD-ROM is now region code free. *reboot* cu in a few minutes...
[01:23] < th> fuer schnelles compilieren
[01:24] < th> huebi: is doch mit libdvdcs ehh ;)
[01:24] < th> s
[01:24] < th> Ge0rG: gibts da auch anonymen auscheck-account?
[01:24] < th> moment
[01:24] < th> Ge0rG: ich hab da doch noch nen account...
[01:24] < Ge0rG> th: ja, gibt es.
[01:24] < th> *denke*
[01:25] < Ge0rG> th: wieso io-performance? *nichtfolgenkann*
[01:25] < th> Ge0rG: ich compiliere da doch was, oder?
[01:26] < th> Ge0rG: mein teha-account geht zwar noch hat aber keine rechte zum auschecken
[01:26] < th> Ge0rG: wie sind die anonym-credentials?
[01:26] < Ge0rG> th: pserver anonymous und leeres passwort? *vermut*
[01:26] < th> args pserver
[01:27] < th> jo das geht
[01:27] < Ge0rG> th: ja, du compilierst den gcc, den kernel und noch ein paar andere sachen. dauert auf meinem 900er duron mehrere stunden
[01:28] < th> Ge0rG: eben und fuer dieses compilieren sollte ich ausreichende IO-performance haben. also kein nfs
[01:28] < th> Ge0rG: wieviel hdd-space sollte ich einplanen?
[01:28] < Ge0rG> th: ich kann dir das Archive-dir zukommen lassen, dann musst du nicht wgetten.
[01:28] < Ge0rG> th: genau, ja.
[01:28] < th> Ge0rG: ist das auch absolut current? ;)
[01:29] < Ge0rG> th: georg@amy:/dbox2/cdk$ du -sh . -> 513M
[01:29] < Ge0rG> dazu kommt das cdkroot
[01:29] < th> ohne meine 45g western digital wird das alles eng
[01:30] < Ge0rG> gestrippt ist das nochma 105mb, ungestrippt wohl um einiges mehr
[01:31]   th loescht mal ein paar rock-isos...
[01:32] < th> Ge0rG: der ppcboot bedient sich immer aus /dbox2 vom server?
[01:33] < Ge0rG> th: aus /tftpboot glaub ich. pass auf, ob der in.tftpd chrooted ist
[01:33] < th> Ge0rG: warum chrooted?
[01:34] < Ge0rG> ich glaub in der default-config wird er nach /dbox2 chrooted
[01:35] < oversize> ist it possible to see how many viedeo RAM i have? i have no clue what the card i use has ...
[01:36] < th> oversize: have a look at bootup
[01:36] < th> oversize: most graphic-chips tell you
[01:36] < th> Ge0rG: der tftpd wird nach /dbox2 chrooted?
[01:36] < oversize> mkay... thx
[01:36] < th> Ge0rG: woher sollte mein tftpd was mit dbox zu tun haben?
[01:37] < Ge0rG> th: ich wollte dich nur gewarnt haben, weil es mir schon mehrfach passiert ist.
[01:37] < th> Ge0rG: ich meinte die frage ernst... warum hat mein tftpd das wissen "dbox2"?
[01:38] < Ge0rG> th: steht in der inetd.conf ;)
[01:38] < th> Ge0rG: achso?
[01:38] < Ge0rG> th: zumindest in der meinen.
[01:38] < Ge0rG> oder stand mal
[01:38] < th> tftp    dgram   udp wait    nobody  /usr/sbin/tcpd  in.tftpd
[01:38] < th> ist dann wohl so ok
[01:39] < Ge0rG> jo
[01:39] < Ge0rG> vielleicht sollte man das ja auf /tftpboot o.ä. limitieren
[01:40] < th> weil sonst jeder depp was per tftp ranziehen kann?
[01:41] < Ge0rG> ja.
[01:42] < th> Ge0rG: was tut man nach dem auschecken?
[01:43] < Ge0rG> th: obige verzeichnis-transformationen - alles ausser doc und cdk nach cdk verschieben.
[01:44] < Ge0rG> th: cdk sollte dann optimalerweise /dbox2/cdk sein.
[01:44] < Ge0rG> und darin kann man ./autogen.sh;./configure;make machen
[01:44] < Ge0rG> bzw. s/;/&&/g
[01:45] < th> grmpf dann hab ich ja schon einen konflikt, wenn server und compiler nicht der gleiche rechner sind
[01:46] < th> Ge0rG: also z.b. boot und apps nach cdk
[01:47] < Ge0rG> ich hab compiler != server.
[01:47] < Ge0rG> th: ja
[01:48] < Ge0rG> auf der krups liefert mplayer -vo sdl nur ein schwarzes bild.
[01:48] < th> Ge0rG: warum optimalerweise /dbox2?
[01:48] < tsa> soo..
[01:49] < Ge0rG> th: sonst muss man mit configure-parametern rumspielen ;)
[01:49]   tsa geht mal das bett suchen.
[01:49] < tsa> n8 *
[01:49] < th> n8 tsa
[01:49] < Ge0rG> cu tsa
[01:49] < th> Ge0rG: ueberzeugt ;)
[01:49] -!- tsa [~tsa@p5082BF96.dip.t-dialin.net] has quit ("Client Exiting")
[01:49] < Ge0rG> fbdev: using /dev/fb0
[01:49] < Ge0rG> fbdev: 8 bpp output is not supported.
[01:49] < Ge0rG> Error opening/initializing the selected video_out (-vo) device!
[01:49] < Ge0rG> -vo fbdev geht auch nicht.
[01:50] < Ge0rG> man müsste mplayer mit 8bit-dithering support bauen
[01:50] < th> Ge0rG: also ein mkdir /dbox2 ; cd /dbox2; ln -s DA_WO_ICH_BUILDENWILL/cdk
[01:50] < Ge0rG> th: ich hab ln -s /blafasel/dbox2 /dbox2
[01:50] < th> aclocal: couldn't open `configure.in': No such file or directory
[01:51] < Ge0rG> dann fehlt wohl noch automake oder sowas.
[01:51] < th> autogen.sh schlaegt fehl
[01:51] < Ge0rG> oder autoconf. eins davon wars.
[01:52] < th> eigentlich nicht
[01:52] < th> zumindest nicht laut INSTALL
[01:52] < Ge0rG> th: erstes gesetz der softwareentwicklung: jegliche dokumentation ist veraltet
[01:53] < Mike1> n8 all
[01:53] < Ge0rG> cu Mike
[01:54] < th> Ge0rG: weder automake, autoconf, aclocal etc...
[01:55] < Ge0rG> th: hm... ich hab jedenfalls ein funzendes configure erhalten können nach nur wenigen programmaufrufen
[01:55] < th> grmpf
[01:56] < Ge0rG> th: zwischendurch könnte ich dir ja die 100mb archive scp'n
[01:57] < th> Ge0rG: sind die denn auch current?
[01:57] < Ge0rG> th: bis auf drei oder vier dateien, ja
[01:58] < th> Ge0rG: dann schieb mal
[01:58] < Ge0rG> th: nach ~georg/?
[01:59] -!- Mike1 [~mike@odin.informatica.co.cr] has left #rocklinux ("Client Exiting")
[01:59] < th> Ge0rG: jo
[02:00] < Ge0rG> das tempo ist (noch) besser als saugen mit dsl.
[02:01] < th> hmmm meine autoconf dinger sind alle zu alt?
[02:01] < th> kann doch nich sein.
[02:01] < th> das lief doch mal
[02:02] < esden> hmm ... forum ... 5w337
[02:05] < th> Ge0rG: mit aktuellen versionen von libtool, autoconf, automake alles kein problem ;)
[02:05] < th> Ge0rG: und dank rock sehr schnell updated ;)
[02:05] < Ge0rG> hehe
[02:05] < th> Ge0rG: soll ich ueberhaupt irgendwelche configure options angeben?
[02:06] < Ge0rG> th: wenn dein cdk in /dbox2/cdk liegt, und der output nach /dbox2/cdkroot soll, dann nicht
[02:06] < th> das wird alles verlinkt ;)
[02:06] -!- oversize is now known as over^zZz
[02:06] < th> Ge0rG: und make download soll ich seinlassen?
[02:07] < Ge0rG> th: noch gar kein make machen
[02:07] < Ge0rG> th: der macht download auch automatisch bei bedarf.
[02:07] < th> ok
[02:07] < Ge0rG> Archive/linux-2.4.2.tar.bz2       |   13MB |  31.3 kB/s | ETA: 00:03:18 |  68%
[02:07] < Ge0rG> es kommt was ;)
[02:07] < th> Ge0rG: aber nur, wenn er die files noch nicht vorfindet?
[02:07] < Ge0rG> th: ja.
[02:07] < th> args immernoch 2.4.2er kernel?
[02:08] < Ge0rG> ja
[02:08] < th> Ge0rG: was spricht gegen einen aktuellen kerne;?
[02:08] < Ge0rG> th: weiss ich nicht. bring einen zum laufen.
[02:12] < th> Ge0rG: was steckt im cdk drin, was fuer sound sorgt? ein kernel patch?
[02:13] < Ge0rG> th: vermute ich.
[02:13] < Ge0rG> schau in cdk/Patches
[02:13] < Ge0rG> hm... auf der krups funktioniert usleep(1000) nicht so wie es soll.
[02:15] < th> Ge0rG: wie heissten der soundchip?
[02:15] < Ge0rG> th: das weiss ich nicht
[02:15] < th> cat /proc/cpu?
[02:15] < th> cat /proc/pci?
[02:16] < Ge0rG> cat: /proc/pci: No such file or directory
[02:16] < th> ouhm
[02:17] < esden> lool ... the mail with a forum account confirmation was catched by spam-assasin as spam
[02:17] < th> Ge0rG: wie weit is dein schieben?
[02:18] < th> Ge0rG: die patchen in den kernel ein ARCH := ppc
[02:19] < th> Ge0rG: die deppen
[02:19] < Ge0rG> th: mach du, ausm scp sieht man das nicht direkt
[02:19] < th> 41M
[02:19] < th> von 100?
[02:19] < Ge0rG> ja
[02:20] < esden> soo ... ich glaube ich gehe heim
[02:20] < esden> cu all
[02:20] < Ge0rG> hm... auf der krups hab ich mplayer mpeg1 mit grob 1/20 fps
[02:20] < Ge0rG> bye esden
[02:20] < th> Ge0rG: muss ich echt die 100 abwarten, bevor ich nen cross-compiler kriege?
[02:20] < th> bye esden
[02:21] < Ge0rG> th: hm... wenn ich das nach wichtigkeit sortieren könnte, wäre es wohl nicht der fall.
[02:21] < Ge0rG> th: aber der gcc fehlt noch immer
[02:22] < Ge0rG> aah, mit -hardframedrop ~ 1fps
[02:29]   Ge0rG hat eben doom auf der krups gespielt.
[02:29] < th> oho
[02:30] < th> mit welcher fps?
[02:30] < chrisime> diese edonkey teile unter linux sind schrott
[02:30] < chrisime> hatte es mal vor nem hlaben jahr hinbekommen
[02:30] < chrisime> da braucht man keine gui wenn der  mist eh net geht
[02:30] < chrisime> *aurfreg*!
[02:32] < Ge0rG> th: weiss ich nicht. aber da sdl die palette nicht richtig setzt, musste ich so nen hintergrund-paletten-manipulator einsetzen, der dem spiel eine art disco-stimmung verlieh.
[02:33] < _NULL> gn8
[02:33] -!- _NULL [~mail-spam@B55fc.pppool.de] has quit ("sleep 36000")
[02:39] -!- Netsplit over, joins: th
[02:45] < Ge0rG> th: fertig.
[02:46] < th> Ge0rG: ah grmpf. 100mbit issn problem fuer die dbox?
[02:46] < Ge0rG> th: du kannst Archive/ nach cdk/ verschieben.
[02:47] < Ge0rG> th: ja, sie kann nur 10mbit. und autonegotiation führt meist zum verlust der bootp-anfrage
[02:47] < th> Ge0rG: damn. mein 10er hub is doch absent :-/
[02:48] < th> schluchz/
[02:48] < th> ich bin verloren
[02:48] < Ge0rG> th: du kannst auch eine weitere netzwerkkarte in einen host verbauen und diesen als gw nutzen
[02:48] < Ge0rG> kann auch eine 100er sein, wenn du sie auf 10 halfduplex festlegst.
[02:49] < th> so ein dreck
[02:50] < th> dann brauch ich meinen 10er hub ja doch noch
[02:50] < th> oder noch einen bnc/tp repeater
[02:50] < th> dann kann ich mit 100er tp in den repeater per bnc an den anderen repeaeter und mit tp wieder an die box
[02:50] < th> spaetestens dann sinds 10mbit
[02:52] < th> is da denn nothing to make... damn
[02:53] -!- heksriz [~hrio@p5081FD46.dip.t-dialin.net] has left #rocklinux ("Client Exiting")
[02:53] < th> Ge0rG: ob ein cat3 kabel helfen wuerde?
[02:53] < Ge0rG> th: glaube nicht.
[02:56] < th> ich wusste es wuerde ein fehler sein das teil wegzugeben
[02:56] < th> ich koennte noch nen 10er hub holen
[02:58] < th> fuer nen pc als gw braeuchte ich ein cross-cable was ich auch nich hier hab
[03:00] < Ge0rG> man könnte bei einer einmaligen aktion linux ins flash tun.
[03:01] < Ge0rG> dann braucht man kein 10 mbit.
[03:01] < th> was meinst du mit einmalige aktion?
[03:01] < Ge0rG> naja, eine aktion bei der man 10mbit braucht.
[03:01] < th> achso
[03:01] < th> mittlerweile hab ich eigentlich kein interesse mehr an dem br-dreck
[03:02] < th> Ge0rG: kann das interface grundsaetzlich auch 100?
[03:03] < Ge0rG> th: nein. aber wenn du den ppcboot aus dem flash bootest, hat autonegotiation genug zeit, um einzusetzen.
[03:03] -!- LocalHero [LocalHero@alexanders.lunds.lu.se] has quit ()
[03:03] -!- chrisime [~chrisime@p50803A68.dip.t-dialin.net] has quit ("blah")
[03:03]   Ge0rG hat sich allerdings nicht mit den nebeneffekten eines linux im flash befasst bis jetzt
[03:04]   th besorgt sich jetzt mal die hardware fuer 10mbit enforcement
[03:04] < th> bbl
[03:34] -!- Kirah [distract@pD9001E74.dip.t-dialin.net] has joined #rocklinux
[03:36] < Kirah> anybody awake?
[03:37] < Ge0rG> nope
[03:38] < Kirah> do you know hackbard?
[03:40] < Ge0rG> seen him..
[03:40] < Kirah> ich nehm an du sprichst auch deutsch
[03:41] < Kirah> ja ich such den
[03:41] < Ge0rG> sorry, kann dir da nicht helfen
[03:41] < Kirah> und weisst du wo mike sich rumtreibt?
[03:41] < Kirah> zufälligerweise
[03:43] < Ge0rG> 01:53:03 <Mike1> n8 all
[03:43] < Ge0rG> 01:58:57 -!- Mike1 [~mike@odin.informatica.co.cr] has left #rocklinux ["Client Exiting"]
[03:43] < Kirah> na gut.. dankeschön
[03:43] < Kirah> ich niste mich hier mal ein wenns recht is
[03:43] -!- Kirah is now known as Kirah|aw
[03:43]   Ge0rG ist selbst nur gast ;)
[03:43] < Kirah|aw> na jut :)
[03:43] < Kirah|aw> denn ma gute nacht
[03:44] < Ge0rG> cu
[03:44] < Ge0rG> und ich finde derweil raus, warum SDL keine paletten auf der krups setzt... *trial&errorcompile*
[03:56] < esden> re hi all
[03:57] < esden> humm ... Ge0rG hast du darueber schon mit fake gesprochen ?
[03:57] < Ge0rG> esden: ich kram mich grad durch den source.
[03:58] < esden> der bastelt mommentas soweit ich weiss irgendwo an den framebuffer treibern
[03:58] < Ge0rG> das palette setzen scheint auf kernel-ebene ja zu gehen.
[03:58] < Ge0rG> aber irgendwo zwischen SDL und dem kernel funkts nicht.
[03:59] < esden> ja ... ich kenne mich da nicht aus ... ich habe nur die krups vom fake bis jetzt gesehen ...
[03:59] < esden> aber ich weiss das er irgendwas ueber nicht funktionierende paletten gesprochen hat
[04:00] < esden> soo ... aber jetzt gehe ich endgueltig ins bett
[04:00] < esden> n8
[04:01] < Ge0rG> cu esden
[04:02] < th> re
[04:04] < Ge0rG> libSDL ist kompiliert, einige sdl-apps auch. und nix geht wie es soll :/
[04:05] < th> Ge0rG: noch immer keine antwort auf arp
[04:05] < Ge0rG> th: keine bootp-anfrage?
[04:05] < th> nein
[04:05] < th> nur rarp who-is
[04:06] < th> hab ich was vergessen?
[04:06] < Ge0rG> rarp kommt vom chorus-kernel.
[04:06] < th> der bootp soll doch auf rarp antworten, nicht wahr?
[04:06] < Ge0rG> dann funzt das sensing doch noch nicht so wie es soll
[04:07] < th> Ge0rG: die kiste haengt jetzt an einem reinen 10er hub
[04:08] < Ge0rG> und eine andere kiste, die an diesem hub hängt, kriegt keinen bootp zu hören?
[04:08] < th> 04:08:05.996445 0.0.0.0.0 > 255.255.255.255.67: (request) [|bootp]
[04:08] < th> und dann rarp
[04:09] < Ge0rG> dann wird der bootp-request nicht beantwortet.
[04:09] < th> aber warum nicht
[04:10] < Ge0rG> kriegt der bootp-server die anfrage mit? läuft inetd / bootpd? ist die bootptab korrekt eingestellt?
[04:10] < th> Ge0rG: ich denke schon.
[04:10] < th> Ge0rG: die krups kriegt ihre antwort ja auch
[04:11] < Ge0rG> 04:11:27.678839 0.0.0.0.0 > 255.255.255.255.bootps: (request) [|bootp]
[04:11] < Ge0rG> 04:11:27.698839 192.168.0.2.bootps > 192.168.0.23.bootpc: Y:192.168.0.23 S:192.168.0.2 ether 0:50:9c:3a:63:73 sname "bender file "/ppcboot"[|bootp]
[04:11] < Ge0rG> 04:11:27.828839 arp who-has 192.168.0.2 tell 192.168.0.23
[04:11] < Ge0rG> so muss das aussehen ;)
[04:11] < Ge0rG> 04:11:27.828839 arp reply 192.168.0.2 (0:0:c0:d2:54:a8) is-at 0:0:c0:d2:54:a8 (0:50:9c:3a:63:73)
[04:12] < Ge0rG> 04:11:27.828839 192.168.0.23.2001 > 192.168.0.2.tftp: 17 RRQ "/ppcboot"
[04:13] < th> also das who-has heisst bei mir rarp und nicht arp
[04:13] < th> und heisst auch nich who-has sondern who-is
[04:14] < Ge0rG> kommt denn die bootp-antwort?
[04:14] < th> nein
[04:14] < Ge0rG> dann stimmt was mit dem bootpd nicht.
[04:14] < th> fuer die krups tut er aber
[04:15] < SMP> th!
[04:16] < th> SMP: jo
[04:18] < th> Ge0rG: smp will 3 kisten mate :)
[04:19] < SMP> jo
[04:19]   Ge0rG wäre froh, wenn er selbst drei hätte ;)
[04:19] < SMP> naah, mitgebracht
[04:19] < Ge0rG> th: wo bleibt eigentlich der nachschub auf umwegen? ;)
[04:19] < th> Ge0rG: da gabs ein "nicht vor irgendeiner pruefung bei esden"
[04:20] < th> Ge0rG: und ein ab september kenn ich wen direkt in nuernberg von fake
[04:20] < Ge0rG> hm....
[04:21] < th> *verzweifel* selbst mit dem anderen hub und mit und ohne umweg ueber AUI gehts nich
[04:24] < th> Ge0rG: es kommt nicht beim bootpd an
[04:24] < Ge0rG> hm...
[04:24] < th> ahhh
[04:24] < th> *vermut*
[04:24] < th> firewalled ;)
[04:25] < th> Ge0rG: traegst du die infos fuer die mate-versorgung mal zusammen?
[04:26] < th> argl
[04:26] < th> Ge0rG: es lag tatsaechlich an den iptables ;-/
[04:30] < Ge0rG> das ist ja unpraktisch
[04:30] < th> Ge0rG: direkt am 100mbit hub gehts auch
[04:31] < th> irgendwo haengts aber noch
[04:35] < th> 04:35:13.862287 0.0.0.0.0 > 255.255.255.255.67: (request) [|bootp]
[04:35] < th> 04:35:13.865384 192.168.1.138.67 > 192.168.1.2.68: Y:192.168.1.2 S:192.168.1.138 [|bootp] (DF)
[04:35] < th> 04:35:14.000244 arp who-has 192.168.1.138 tell 192.168.1.2
[04:35] < th> 04:35:14.000317 arp reply 192.168.1.138 is-at 0:0:e8:78:1a:6b
[04:35] < th> 04:35:14.000588 192.168.1.2.2001 > 192.168.1.138.69: 27 RRQ "/tftpboot/ppcboot,"
[04:35] < th> 04:35:14.103049 192.168.1.138.1598 > 192.168.1.2.2001: udp 19 (DF)
[04:35] < th> 04:35:17.848579 rarp who-is 0:50:9c:3b:76:9e tell 0:50:9c:3b:76:9e
[04:35] < th> 04:35:17.849040 rarp who-is 0:50:9c:3b:76:9e tell 0:50:9c:3b:76:9e
[04:35] < th> 04:35:19.100303 arp who-has 192.168.1.2 tell 192.168.1.138
[04:35] < th> 04:35:19.853734 rarp who-is 0:50:9c:3b:76:9e tell 0:50:9c:3b:76:9e
[04:35] < th> 04:35:20.100284 arp who-has 192.168.1.2 tell 192.168.1.138
[04:36] < th> Jul 27 04:35:14 delta tftpd[18969]: tftpd: trying to get file: /tftpboot/ppcboot,
[04:39] < th> ahh
[04:39] < th> da war noch ein syntaxerror
[04:39] < th> das ,
[04:39] < th> Jul 27 04:39:09 delta mountd[105]: /cdkroot has been mounted by 192.168.1.2
[04:41] < th> Ge0rG: ok, nachdem ich Archive nun auch habe, folgt ein make?
[04:41] < Ge0rG> th: ja
[04:41] < Ge0rG> ein paar sachen wird er noch wgetten müssen
[04:41] < th> binutils
[04:42] < th> SMP: hast du dir in letzter zeit irgendwann nochmal die krups angesehen?
[04:42] < Ge0rG> aah, *merk* der palette-code im igafb ist echt b0rken.
[04:45] < SMP> th: nein
[04:45] < Ge0rG> so, erstma per quickhack im SDL-code ausgleichen, dann später kernel neu bauen
[04:45] < th> SMP: ich hab ein wenig mit dem sound-zeug rumgespielt und konnte zumindest das unresolved symbol loesen...
[04:45] < Ge0rG> ist es wirklich schon bald 5 uhr? *wunder*
[04:46] < th> SMP: aber ich finde am ebus einfach keinen cs4231
[04:46] < SMP> ja, das Problem kenne ich
[04:47] < th> SMP: da is nur serial 8042(ps2/kbd) und rtc
[04:47] < SMP> 'muesste mal mal' etwas kprintf() Debugging machen
[04:47] < th> vllt. hat das mit irq-blacklisting zu tun
[04:47] < th> SMP: ich hab durchsuchen des ebus fuers attachen printkdebugged.
[04:47] < th> SMP: und kam eben zu obigem schluss
[04:47] < SMP> in /proc/openprom ist das cs4231 Kram doch drin?
[04:48] < SMP> aehm. im openpromfs halt
[04:48] < Ge0rG> wo hängt eigentlich fake rum?
[04:48] < Ge0rG> juchu! doom geht!
[04:49] < th> SMP: das is bei mir leer
[04:49] < th> Ge0rG: der crosscompiler ist ja ein gcc-3.1
[04:49] < Ge0rG> th: ja.
[04:49]   Ge0rG spielt jetzt doom mit echtfarben.
[04:50] < th> und ordentlich fluessig?
[04:50] < th> Ge0rG: hast du dafuer was am iga gefixt?
[04:50] < Ge0rG> th: in der SDL
[04:50] < th> Ge0rG: ahh
[04:50] < Ge0rG> th: ein workaround.
[04:50] < Ge0rG> th: weil ich jetzt keinen kernel bauen werde
[04:50] < Ge0rG> sondern morgen früh
[04:50] < th> Ge0rG: mit wieviel farben? 8bit?
[04:50] < SMP> th: dann hast du das openpromfs nicht gemountet ;>
[04:50] < Ge0rG> th: ja
[04:50] < th> SMP: ahh mounten waere ne idee
[04:51] < Ge0rG> th: und ich kann mit 0.5fps mpeg1 spielen.
[04:52] < th> SMP: welcher fs-type issen das?
[04:52] < th> SMP: bdev?
[04:52] < SMP> eh?
[04:52] < SMP> mount -t opempromfs none /proc/opemprom
[04:53] < th> ahh ersma modul laden *vermut8
[04:53] < SMP> je nachdem
[04:53] < th> jo schon
[04:53] < th> ersma noch von fels ranholen
[04:55] < th> SMP: nein da sind auch nur genau die drei die er findet beim ebus durchsuchen
[04:55] < SMP> hmm
[04:55] < SMP> irgendwo hab ich es doch aber mal gesehen
[04:55] < th> du hattest da schonmal cs4231 gesehen?
[04:56] < th> SMP: denk nach ;)
[04:56] < SMP> in /proc/bis/ebus vielleicht?
[04:56] < SMP> s,bis,bus,
[04:56] < th> da hab ich kein ebus
[04:56] < th> nur pci
[04:57] < th> mit irgendwelchen 3 devices drin
[04:58] < SMP> hmmm
[04:58] < th> ich vermute mal su, 8042, rtc
[04:59] < Ge0rG> es ist ja schon um 5. zeit fürs bett
[04:59] < th> quatsch
[05:01] < Ge0rG> draussen wirds hell
[05:01] < Ge0rG> ein sicheres zeichen
[05:01] < Ge0rG> und morgen muss ich mit fake reden und evtl. ne mail an LKML schicken ;)
[05:01] < Ge0rG> ausserdem erwarten mich zahlreiche andere tätigkeiten, u.a. auch lernen für die prüfung
[05:03] < th> ich hab seit heute nen vorhang
[05:03] < th> da wird so schnell nix hell
[05:06] < huebi> re MoeP
[05:07] < th> der huebi
[05:07] < huebi> jo, ewiges hardwaregebastel ;-)
[05:08] < huebi> Ich will ab sofort 1000 Interups habn!
[05:08] < SMP> kauf dir ne VAX
[05:08] < Ge0rG> hm... ich habe meinen PC ausgeschaltet. aber habe ich ihn vorher runtergefahren? *grübel*
[05:08] < huebi> jau, eine 3GHz VAX.
[05:09] -!- Ge0rG [georg@op-co.de] has quit ("Irssi - the client of smart and beautiful people")
[05:16] < th> langsam glaube ich, dass da garkein sound drin is...
[05:18] < SMP> aber sicher..
[05:18] < th> tja ich hab den chip ja gesehen...
[05:18] < SMP> ich glaub ich geh mal ins Bett ;-\
[05:18] < th> na dann gute ruhe SMP
[05:19] < th> morgen bau ich mir ein scsi-raid
[05:24] < huebi> nacht SMP
[05:24] < huebi> th software RAID?
[05:25] < th> nein
[05:25] < th> GDT6527RP
[05:25] < huebi> ATAPI ist doof. SCSI ist aber fast 150% teurer bei DVD-ROMs.
[05:25] < huebi> th: ah. nett ;-)
[05:26] < th> huebi: beim kunden ausgesondert
[05:26] < th> huebi: der hat jetz ide-raid ;)
[05:26] < huebi> guter Kunde ;-)
[05:26] < th> genau
[05:26] < huebi> th: hast du schon mal DVD's unter Linux geripped?
[05:26] < th> ja
[05:27] < th> gerade letzte woche
[05:27] < huebi> Wie tut denn das gehen tun?
[05:27] < th> transcode -i /dev/dvd -x dvd -V -j 16,0 -B 5,0 -Y 40,8 -s 4.47 -U alien -y xvid -w 1618
[05:28] < th> https://www.theorie.physik.uni-goettingen.de/~ostreich/transcode/html/dvd.html
[05:28] < th> die perl gui dvd::rip bietet recht viel
[05:29] < huebi> Danke. das sieht ja sehr gut aus.
[05:29] < huebi> *freu*
[05:30] < huebi> Jau. Ich habe mir heute so ein Pioneer DVD gekauft.
[05:30] < huebi> Vendor: PIONEER  Model: DVD-ROM DVD-500M Rev: 1.07
[05:30] < th> ich hab irgendein LG
[05:31] < th> huebi: du brauchst libdvdcss und solltest in der neusten version DVDCSS_METHOD=title setzen
[05:31] < huebi> und dann erstmal region entcoded. Bloed, dass das nur mit Windows geht. aber jetzt ist das fertig.
[05:32]   huebi freshmeaten
[05:34] < huebi> th:  wo kommt denn /dev/dvd her? Ich habe fuer das dvd ide-scsi aktiviert. Reicht das?
[05:35] < th> aehm
[05:35] < th> kein scsi
[05:36] < th> lr-xr-xr-x    1 root     root           13 Jul 26 15:36 /dev/dvd -> cdroms/cdrom1
[05:36] < th> l /dev/cdroms/cdrom1
[05:36] < th> /dev/cdroms/cdrom1 -> ../ide/host0/bus1/target1/lun0/cd
[05:36] < huebi> th: ah ok. Also nur ein normales CDROM
[05:36] < th> jo
[05:36] < th> huebi: aber du solltest hdparm-tunen
[05:36] -!- capchaos [~capchaos@pD9048472.dip.t-dialin.net] has joined #rocklinux
[05:37] < huebi> mit -X
[05:37] < huebi> ?
[05:37] < th> huebi: z.b.
[05:37] < th> huebi: da is auch irgendwo ein kommentar drueber
[05:37] < th> -X66 -d1 -c1
[05:37] < th> oder so in der art
[05:37] < th> -d is dma
[05:38] < th> ich geh auch ma ins bet
[05:38] < th> t
[05:38] < th> n8
[05:38] < huebi> schlaf gut th
[06:18] -!- capchaos [~capchaos@pD9048472.dip.t-dialin.net] has quit ("Client Exiting")
[06:52] -!- freed [~bofh@pD9001E91.dip.t-dialin.net] has quit ("My damn controlling terminal disappeared!")
[09:26] < blindcoder> moin
[09:37] -!- over^zZz is now known as oversize
[09:37] < oversize> moin
[09:49] < blindcoder> moin oversize
[09:49] < blindcoder> do you have the file libXext.a ?
[09:50] < blindcoder> I do have the .so files but the .a is missing
[10:09] < oversize> me? no
[10:09] < oversize> i have trouble configuring and compilng my kernel 8(
[10:11] < blindcoder> what do you want to do?
[10:12] < oversize> compiling y new kernel, beacuas i want to have ae least some netwrok support in it
[10:12] < blindcoder> can I help you?
[10:12] < oversize> but its breaking showing a error message i cannot remeber now...
[10:12] < oversize> i m in the menuconfig again right now
[10:13] < blindcoder> hmm
[10:13] < oversize> do you know where i can get some detaile dinformation aboiut thze available options in menuconfig ?
[10:14] < blindcoder> puh... aisde from the HELP Button and the Documentation/ directory... noe, sorry
[10:15] < blindcoder> s,noe,no,
[10:16] < oversize> hm... well i will ty it again, and see whats happening.
[10:16] < blindcoder> good luc
[10:16] < blindcoder> k
[10:16] < oversize> 8)
[10:16] < oversize> but first i have to breakfast :)
[10:17] < blindcoder> hehe, I just came back from breakfast (3 Cups of coffee)
[10:19] < oversize> *g i m having some eggs i think ...
[10:37] < oversize> is there a reason why there is no @ in the channel ?
[10:38] < blindcoder> it's not needed
[10:39] < oversize> mkay
[10:40] < oversize> brb .... reboot... cu ....
[10:40] -!- oversize [oversize@frnk-d514e1b3.dsl.mediaWays.net] has quit ("[ NoNameScript 3.52 @ www.nnscript.de ]")
[11:11] -!- Kirah|aw is now known as Kirah
[11:12] < huebi> Hallo Kirah ;-)
[11:12] < blindcoder> hi Kirah
[11:12] < blindcoder> moin huebi
[11:12] < Kirah> hi leute
[11:12] < huebi> moin blindcoder
[11:17] < blindcoder> huebi: do you know which package contains the libXext.a file? I grepped through the flists of base but it wasn't there
[11:22] < huebi> blindcoder: mom
[11:29] < th> moin
[11:29] < blindcoder> moin th
[11:29] < th> wieso hab ich nen load von 0.5 aber nur idle processes?
[11:30] < blindcoder> ???
[11:30] < blindcoder> ich kenn nen load von 1 mit nice prozessen...
[11:30] < blindcoder> oder nen load von 66.0 mit spamassassin...
[11:31] < th> xfree86:xfree86: usr/X11R6/lib/libXext.so.6.4
[11:31] < th> blindcoder: load average: 0.59, 0.54, 0.47
[11:31] < blindcoder> ja, die .so files sind da, aber das .a file nicht
[11:31] < th> CPU states:  0.5% user,  0.9% system,  0.0% nice, 98.4% idle
[11:31] < th> blindcoder: .a's sind bei rock rar... meine qt-statics wurden mir auch wieder gekuerzt
[11:31] < blindcoder> interessant
[11:32] < blindcoder> th: hmm.. das problem ist dass dadurch dosemu nicht compilen will
[11:32] < blindcoder> zumindest nicht mit X unterstuetzung
[11:33] < th> blindcoder: ich vermute du wirst sie in keinem package finden. schreib ne extension
[11:35] < blindcoder> hmm...
[11:35] < th> blindcoder: und wenn du schon dabei bist, kannst du gleich noch ne qt-e-extension schreiben
[11:35] < th> ;>
[11:35] < blindcoder> werden die .a erst beim iso-erstellen gelöscht?
[11:36] < th> nein
[11:36] < blindcoder> oder wieso meinst du dass es als .ext funktioniert?
[12:07] < th> weil du in der ext andere optionen zum compilieren angibst, so dass die .a's erzeugt werden
[12:08] < blindcoder> achso, du meinst ne ext zu XFree
[12:13] < th> jo
[12:13] < th> oder nur libXext
[12:13] < th> wenns das solo gibt
[12:13] < blindcoder> hmm ich fürchte zwar nicht, aber ich schau mal
[12:14] < blindcoder> weil wenn ich dosemu zum compilen krieg kann ich dungeon keeper und UFO unter linux spielen :)
[12:31] -!- Kirah is now known as Kirah|aw
[12:43] < [anders]> moin
[12:44] < [anders]> how is everybody today then? /me is just waiting to start hearing all the friggin airplanes to start flying over here...
[12:44] < huebi> moin [anders]
[12:44] < blindcoder> moin [anders]
[12:44] < [anders]> hullo there huebi :) everything alright?
[12:45] < [anders]> morning blindcoder .. what's up? :)
[12:45]   [anders] reading 2.4.19 changelog as 2.4.19-rc3-ac3 went onto the laptop last night.. (Well, at about 1am this morning actually..)
[12:46] < [anders]> bit pissed off I can't get it running on the Athlon box though.. I am sure it is something stupid I am doing, but all settings are the same as for the 2.4.18 kernel on there so it bloody should work..
[12:46] < huebi> [anders]: Yes, I'm awake, feeling good, trying to rip a dvd under linux. Having a nice talk with a friend about our female counterparts *g*
[12:47] < [anders]> huebi: hehehe.. you will have more luck ripping the DVD than trying to understand the opposite sex.. :-D
[12:48] < blindcoder> [anders]: dosemu si up and i'm about to collapse
[12:48] < [anders]> b.t.w. JFS is now in the kernel as of 2.4.19....
[12:48] < huebi> [anders]: ACK. I gave up to understand it. now I try to let the other side understand me
[12:48] < [anders]> blindcoder: you are having a play with dosemu? I remember having a play with that some year(s) ago.. wasn't useful to me then, but perhaps now.. :)
[12:48] < th> huebi: good idea ;0
[12:49] < [anders]> huebi: probably a lot safer... ;-)
[12:49] < blindcoder> well the stable release doesn't work with 2.4.x but the unstable compiles like a miracle... if you don't want static linking, that is
[12:49] < blindcoder> and just about now dungeon keeper is running :)
[12:50] < huebi> Yes and more easy to achive - to say what I want/think and to adopt me words to the reaction.
[12:50] < [anders]> huebi: I have just been told that as long as you are on the clear with the fact that women is always right, you can't go wrong.. (My gf is telling me this... ;-)
[12:51] < th> huebi: that even allows a more lazy stile of living ;)
[12:52] < [anders]> loads of MIPS fixes in 2.4.19-rc3...
[12:53] < blindcoder> [anders]: that will make fake happy :)
[12:54] < [anders]> blindcoder: I think he might already have had a look at it.. -rc3 has been out for a little while and when I mentioned it the other day he went and had a look at it.. I am having problems with 2.4.19-rc3-ac3 on k7, but on i686 it works well..
[12:54] < huebi> [anders]: But never use the sharp "Blade of Male Logic" on the being right of a woman. Really big pain for her if she mention that she couln't be right at all.
[12:55] < [anders]> What I like about it is that they have implemented SpeedStep (CPU Frequency Scaling) in it.. Which is kool.. :)
[12:55] < huebi> blindcoder: I fake now in Ingolstadt
[12:55] < huebi> ?
[12:56] < blindcoder> huebi: I think so... he drove off yesterday evening
[12:56] < [anders]> huebi: women and logic are two words that does not go in the same sentence.... ;-)
[12:57] < blindcoder> huebi: But I'll see him in about 5 hours from now...
[12:59] < huebi> [anders]: of course it goes if you get a women to try to be logic she is not on her own field anymore and gets some trouble. The art is to let her stay in her area of feeling and to get a consens with her while I stay in my area of logic.
[13:00] < [anders]> huebi: a dangerous path to walk indeed my friend. It is hard to understand someone illogical whilst trying to stay focused and logical about things..
[13:02] -!- netcrow [netcrow@apollo.bingo-ev.de] has joined #rocklinux
[13:06] < [anders]> oh yes, there is also big updates to the usb / usb-storage layer in 2.4.19-pre/rc .. Hopefully things will stop locking up the system now when copying large (>12GB) amount of data onto a usb attached hdd...
[13:07] < blindcoder> btw.: is serial ata due for 2.6 or will it be after the codefreeze? i currently don't ahve the site handy
[13:08] < [anders]> blindcoder: I doubt you will see serial ATA in 2.4, not even back-ported..
[13:10] < [anders]> perhaps, if it becomes popular enough someone will backport it... It is a way off yet still though.. Can you even buy anything with serial ATA on it?
[13:10] < blindcoder> no i mean 2.5. or 2.6.
[13:10] < blindcoder> i think there are one or two board with SATA right now
[13:11] < [anders]> it should get into 2.5 once the boards start getting available at a reasonable price and the developers can get their hands on it so they can test it..
[13:12] -!- Freak [freak@p50839964.dip.t-dialin.net] has quit (Read error: 110 (Connection timed out))
[13:15] -!- Freak [freak@p50838D74.dip.t-dialin.net] has joined #rocklinux
[13:19] < [anders]> https://www.theregister.co.uk/content/4/26391.html  <-- Nice reading... :)
[13:25] < blindcoder> yes it is, although I don't really like the register... it's like the german BILD-Zeitung
[13:26] < [anders]> blindcoder: not read that one.. my german is a tad rusty (to be precise, it is pretty darn poor..)
[13:26] < blindcoder> [anders]: well... the most interesting part in BILD are the nudes on the front-side
[13:26] < [anders]> The Reg is fun because of the BOFH stories they stick on there from time to time.. And they sometime do break news that are interesting..
[13:27] < [anders]> blindcoder: *lol* Okay, I start to get the picture.. Must be a bit like The Sun or The Mirror here in UK then..
[13:27] < [anders]> Zeitung means what?
[13:27] < blindcoder> yeah, but you have to make a distinction between the actual news in the reg and crappy own meanings
[13:27] < blindcoder> Zeitung = Newspaper
[13:28] < blindcoder> or assumptions that is
[13:28] < [anders]> BILD-Zeitung = Picture Newspaper ?
[13:28] < blindcoder> it's just the name
[13:28] < blindcoder> but yeah, there are more pictures in it than actual text
[13:28] < Kirah|aw> lol
[13:28] < [anders]> 'bild' is a swedish word meaning 'picture'. :)
[13:28] < blindcoder> I'm surprised that they didn't report that meteor NT-something
[13:29] < blindcoder> "WE'RE ALL GOING TO DIE" would have been the headline :-)
[13:29] < blindcoder> yes, bild means picture in german, too
[13:30]   [anders] looks out the window and spots several fighterjets fly past..
[13:30] -!- Freak [freak@p50838D74.dip.t-dialin.net] has quit (Read error: 110 (Connection timed out))
[13:31] -!- Kirah|aw is now known as Kirah
[13:32] < blindcoder> maybe they're heading for redmond :)
[13:32] < [anders]> blindcoder: no, there is an air-show here in Farnborough this weekend.. Euro-Fighter is being shown, as well as lots of other jets..
[13:33] < blindcoder> sweet. you're not watching?
[13:33] < [anders]> SAAB apperantly showed a prototype of an unmanned jet earlier in the week..
[13:33] < [anders]> blindcoder: tickets was sold out over six months ago.. ;-)
[13:33] < blindcoder> *UARGH*
[13:34] -!- Ge0rG [georg@op-co.de] has joined #rocklinux
[13:34] < th> hi Ge0rG
[13:34] < blindcoder> hi Ge0rG
[13:34] < [anders]> moin Ge0rG, wie gehts?
[13:34] < th> Ge0rG: *ueberfall*
[13:34] -!- Freak [freak@pD9E395E9.dip.t-dialin.net] has joined #rocklinux
[13:34] < Ge0rG> guten morgen allerseits :)
[13:34] < Kirah> hi Ge0rG
[13:35]   Ge0rG ists nicht gewesen! *allesabstreit*
[13:35] < th> Ge0rG: ich hab kein dsp mit neuestem cdk
[13:36] < blindcoder> okay, I'm playing an old classic now: SerfCity 1
[13:36] < Ge0rG> th: /dev/sound/dsp ist bei mir da. *weiss*
[13:36] < th> Ge0rG: da hab ich nur mixer
[13:37] < Ge0rG> und ich hab noch nicht mal irgendwelche zusatz-module laden müssen
[13:37] < blindcoder> c ya
[13:37] < th> Ge0rG: was fuer module sind denn geladen?
[13:37] < Ge0rG> th: mom.... erst ma dbox booten
[13:37] < th> Ge0rG: komm ruhig drauf host=dbox user=root pass=root
[13:37] < Ge0rG> die macht mir normal zu viel abwärme ;)
[13:37] < th> Ge0rG: ich mach grad noch nen make extra
[13:38] < th> Ge0rG: nichmal ein ps funktioiert
[13:38] < Ge0rG> hm...
[13:38] < Ge0rG> ich hab das neue cdk übers alte kopiert, d.h. die früher gebauten tools waren dann noch immer da
[13:39] < Ge0rG> und im moment will ich nur meinen neuen krups-kernel testen
[13:39] < th> huebi: kannst du dem georg mal account auf ella+fels geben?
[13:40] < Ge0rG> th: root@dbox:~# ls /dev/sound/
[13:40] < Ge0rG> dsp     mixer   mixer1
[13:41] < th> *lechz*
[13:41] < th> Ge0rG: lsmod
[13:41] < Ge0rG> th: das ist zu lang für den chan, du kriegst gleich ein .txt
[13:42] < th> Ge0rG: btw. make all lief nich sauber durch. scheiterte an irgendnem Common++ zeug...
[13:42] < Ge0rG> hm...
[13:42] < th> Ge0rG: hab mich dann fuer make -k entschieden
[13:43] < [anders]> mmhmmm.. The Euro is now worth more than the Dollar in Sweden.. That is a first..
[13:44] < Ge0rG> hm... die palette beim booten stimmt noch.
[13:45] -!- WKaibigan [~Aloicious@ACB7A40E.ipt.aol.com] has joined #rocklinux
[13:45] < [anders]> re WKaibigan
[13:45] < WKaibigan> Hi there.
[13:45] < [anders]> WKaibigan: sorry I missed you yesterday.. did you get the e-mail?
[13:45] < Ge0rG> th: lsmod.txt liegt in delta:~georg
[13:45] < WKaibigan> Yeah got it thanks.
[13:46] < th> Ge0rG: das avia zeug also
[13:46] < [anders]> I can't quite figure out the problem with bonobo and evolution, and I am a little scared of hacking the source to get it right.. apperantly someone had exactly the same problem with Evolution 1.0 on FreeBSD in the ports system
[13:47] < th> Ge0rG: gabs da parameter beim modul-laden?
[13:47] < th> Ge0rG: meine wollen nich rein
[13:47] < Ge0rG> th: du hast vergessen, die firmware zu kopieren!
[13:48] < th> Ge0rG: die brauch ich auch fuer sound?
[13:48] < Ge0rG> th: die brauchst du für alle funktionen der chips.
[13:48] < th> /var/tuxbox/ucodes
[13:48] < th> ?
[13:48] < Ge0rG> th: ja.
[13:48] < th> Ge0rG: die sind doch noch die alten?
[13:49]   Ge0rG verirrt sich gerade auf seinen 5 desktops mit bunt gemischten shells auf 5 hosts
[13:49] < Ge0rG> th: japps
[13:49] < Ge0rG> und die palette funzt mit dem kernelpatch.
[13:50] < th> Ge0rG: dann release den patch irgendwo
[13:50]   Ge0rG muss noch ein bisschen testen.
[13:51] < th> ich haette die gebrannte cd vom cdkroot vorm loeschen dessen testen sollen :-(
[13:51] -!- Freak [freak@pD9E395E9.dip.t-dialin.net] has quit (Read error: 110 (Connection timed out))
[13:52] < Ge0rG> th: fehlen dir die rest-files?
[13:53] < th> Ge0rG: ich probier noch die CD auszulesen
[13:53] < Ge0rG> achso
[13:53] < th> cp: reading `500v093.ux': Input/output error
[13:53] < th> cp: reading `avia600.ux': Input/output error
[13:53] < th> damnn
[13:53] -!- Freak [freak@pD9530D27.dip.t-dialin.net] has joined #rocklinux
[13:53] < th> aber ich hab da noch ne cd... *vermut*
[13:54] < Ge0rG> hm... fbv zeigt mir bei nem jpeg auch furchtbare falschfarben. kann aber auch daran liegen, dass es nur je 3bit für rot und grün und 2bit für blau hat
[13:55]   [anders] is watching the EuroFighter show...
[13:57] < th> Ge0rG: jepp ein altes backup hatte alles noc.
[13:57] < th> h
[13:59] < th> Ge0rG: was issen das .lcdmenu?
[13:59] < th> Ge0rG: vergiss es. es compiliert nicht
[13:59] < Ge0rG> th: damit kann man beim booten auswählen, welche gui gestartet wird
[13:59] < th> das brauch ich ehh nicht
[14:01] < th> Ge0rG: aber ps scheitert noch immer
[14:01] < th> ps: 1: Syntax error: "(" unexpected
[14:01] < Ge0rG> th: die shell auf der box ist nicht so schlau.
[14:02] < Ge0rG> oder ist das noch beim bauen?
[14:02] < th> noe
[14:02] < th> da baut nix mehr
[14:03] < th> Ge0rG: hast du madplay binaries fuer mich?
[14:03] < Ge0rG> th: ja. wieder auf delta?
[14:03] < th> Ge0rG: ja bitte /cdkroot/opt/
[14:04] < Ge0rG> hab ich da +w?
[14:04] < th> jo
[14:04] < th> 1777
[14:05] < Ge0rG> ich habs direkt dahin kopiert *:)
[14:05]   [anders] is now watching a Su-27 having fun over Farnborough
[14:06]   Ge0rG has got a linux chick displayed on his krups fb.
[14:07] < th> Ge0rG: wo kommten der sound raus?
[14:07] < Ge0rG> th: da, wo auch der tv-ton rauskommt
[14:08] < Ge0rG> mal mplayer mit divx-support bauen *:)
[14:10] < th> da brauch ich doch verdammt nochmal ne cinch>klinke kupplung *fluch*
[14:10] -!- Freak [freak@pD9530D27.dip.t-dialin.net] has quit (Read error: 110 (Connection timed out))
[14:13] -!- Freak [freak@pD9E396F6.dip.t-dialin.net] has joined #rocklinux
[14:29] -!- WKaibigan [~Aloicious@ACB7A40E.ipt.aol.com] has quit ()
[14:29] -!- Freak [freak@pD9E396F6.dip.t-dialin.net] has quit (Read error: 110 (Connection timed out))
[14:32] -!- Freak [freak@pD9E39322.dip.t-dialin.net] has joined #rocklinux
[14:33] < th> Ge0rG: das klingt grauenvoll
[14:34] < Ge0rG> th: warum?
[14:34] < th> Ge0rG: hast du ne ahnung wie ich ein 44khz mp3 in eins umwandle, was auf der box vernuenftig klingt?
[14:34] < th> Ge0rG: wahrscheinlich weil es 44khz sind
[14:35] < Ge0rG> th: dekodieren, mit einem audioeditor auf 48khz resamplen, encoden?
[14:35] < th> Ge0rG: konkrete vorschlaege?
[14:36] < Ge0rG> th: war das nicht einer? ;)
[14:36]   Ge0rG weiss ja nicht mal, ob das so gehen wird.
[14:36] < th> damn
[14:37]   Ge0rG ist erst ma AFK - nahrung aufnehmen.
[14:38] < Ge0rG> unter win hätte ich da was und würde auch mal was resamplen.
[14:38] -!- LocalHero [LocalHero@alexanders.lunds.lu.se] has joined #rocklinux
[14:38] < th> Ge0rG: gna. das waere sehr unpraktisch wenn ich alle mp3s erst zu dir schaffen muss
[14:39] < th> Ge0rG: step by step... als erstes ein wav ausm mp3.. das koennte xmms. aber ich will das vonner commandline
[14:40] < th> mpg123 kann das wohl
[14:41] < th> ahh ein wav an ein dsp zu pipen ist sinnfrei *feststell*
[14:42] < th> sox kann das ganz sicher resamplen
[14:48] < th> Ge0rG: wieviel khz brauch ich?
[14:48] < th> 48000 genau?
[14:50] -!- netcrow [netcrow@apollo.bingo-ev.de] has quit ("leaving")
[14:51] < th> l
[14:52] < th> Ge0rG: 48000 klingt nur sehr wenig besser
[14:52] < Ge0rG> hm... seltsam.
[14:52] < th> Ge0rG: is 48000 exakt?
[14:52] < Ge0rG> th: also bei mir spielt es 44k1-mp3s sauber, aber etwas zu schnell ab.
[14:52] < Ge0rG> th: IIRC schon
[14:53] < th> Ge0rG: bei mir nicht
[14:53] < th> Ge0rG: die geschwindigkeit scheint zu stimmen, aber es sind lauter "ruckler" drin
[14:54] < Ge0rG> th: und du nimmst madplay?
[14:54] < th> Ge0rG: ja
[14:54] < th> ./madplay test.mp3
[14:54] < Ge0rG> hm... gib ma die test.mp3
[14:54] < th> nimm sie dir
[14:54] < th> liegt neben madplay ;)
[14:55] < huebi> th: hast du eine idee?
[14:55] < huebi> [import_dvd.so] delaying DVD access by 3 second(s)
[14:55] < huebi> ...libdivxencore.so: cannot open shared object file: No such file or directoryvideo export module error: init failed
[14:55] < huebi> error: failed to init encoder
[14:55]   Ge0rG versucht gerade, fbv dazu zu bringen, farben ordentlich zu dithern. mit wenig erfolg :/
[14:57] -!- Kirah is now known as Kirah[away]
[14:57] < th> Ge0rG: hast du nen mixer am laufen?
[14:57] < th> Ge0rG: wenn ich nicht ueber tvkarten in sondern direkt mit boxen an die dbox gehe ist es viel zu laut
[14:58] < Ge0rG> th: nein, hab keinen mixer
[14:58] < th> Ge0rG: ist dir das nicht viel zu laut?
[14:58] < th> ;)
[14:59] < Ge0rG> th: das geht an line-in vom pc
[15:02] < th> Ge0rG: also die geschwindigkeit stimmt
[15:02] < th> Ge0rG: aber die qualitaet ist mies
[15:03] < th> hmmm
[15:03] < Ge0rG> hm... komisch
[15:03] < th> Ge0rG: die stoerungen verstaerken sich wenn ich die box antelnet
[15:03] < th> e
[15:03] < th> Ge0rG: bei jeglicher netzlast
[15:03] < Ge0rG> th: bei deiner mp3 stelle ich das auch fest... hmm...
[15:04] < Ge0rG> nimm ma sw.mp3
[15:04] < th> l
[15:04] < th> Ge0rG: das spielt bei dir sauber?
[15:05] < Ge0rG> th: ohne fehler, aber zu schnell
[15:05] < th> Ge0rG: also sobald ich mal ein ls im telnet mache wird das knattern viel staerker
[15:05] < th> l
[15:06] < th> Ge0rG: kann es sein, dass ich nur nicht merke, dass es zu schnell ist?
[15:06] < th> Ge0rG: auf jedenfall knattert es nicht
[15:06] < th> spiel du mal das test.mp3
[15:06] < Ge0rG> th: das knattert bei mir.
[15:06] < Ge0rG> weiss nicht, woran das liegt.
[15:06] < th> Ge0rG: also liegts am mp3
[15:06] < th> damn
[15:07] < th> Ge0rG: vllt liegt es an den 192kbps
[15:07] < Ge0rG> das ist möglich.
[15:07] < th> Ge0rG: kennst du ein kommandozeiler, mit dem ich die rate anzeige?
[15:08] < Ge0rG> mpg123 zeigt sie beim spielen an
[15:08] < Ge0rG> file evtl.
[15:08] < th> jo file is gut
[15:10] < th> Ge0rG: dein file is auf 22.05 downgesampled
[15:10] < Ge0rG> hm... daran mags auch liegen
[15:11] < th> Ge0rG: das heisst die cpu kommt einfach nicht so flink mit dem abspielen hinterher?
[15:11] < th> s/abspielen/decoden/
[15:11] < Ge0rG> das ist recht wahrscheinlich
[15:11] < Ge0rG> so, nächsten palette-bug lokalisiert... glaub ich.
[15:12] < th> Ge0rG: koennte man der box einen schon decodierten stream zukommen lassen?
[15:12] < Ge0rG> th: ich kenne keine lösung, die das machen würde.
[15:12] < Ge0rG> probiers einfach aus
[15:12]   Ge0rG ist jetzt AFK - das wetter konsumieren
[15:12] -!- LocalHero [LocalHero@alexanders.lunds.lu.se] has quit ()
[15:12] < th> Ge0rG: mit madplay --downsample klingt das test.mp3 auch ok
[15:13] < th> 192 kbps
[15:13] < th> Ge0rG: und ein "zu schnell" kann ich weiss gott nicht nachvollziehen
[15:13] < Ge0rG> th: spiel sie mal auf dem PC ab
[15:14] < th> Ge0rG: das mach ich regelmaessig mit der test.mp3
[15:14] < Ge0rG> vergleiche ma sw.mp3 auf dbox und pc
[15:15] < th> Ge0rG: genau gleich
[15:15] < Ge0rG> hm... vielleicht ist der bug dann schon fixed? *vermut*
[15:15] < th> Ge0rG: ich hab jetzt mal handgestoppt... beides gleiche zeit
[15:17]   Ge0rG stellt seine debugging-tätigkeit bis heute nacht ein.
[15:20] < th> Ge0rG: kannst du stuff per nfs ranmounten?
[15:20] < th> Ge0rG: mal abgesehen vom root?
[15:25] < th> Ge0rG: ich braeuchte jetzt noch ne gute clock
[15:26] < Ge0rG> th: stuff?
[15:26] < th> Ge0rG: schon erledigt. war wohl ein locking problem
[15:27] < th> funstuff/lcd-savers hmm
[15:27] < th> da koennte was sein
[15:27] < th> warum hat der die apps nicht gemaked?
[15:27] < Ge0rG> die bcdclock kann ich sehr empfehlen ;)
[15:27] < Ge0rG> digiclock hat sogar ein skinnable interface ;)
[15:28] < Ge0rG> hm... war die digiclock da mit drin?
[15:28] < th> Ge0rG: ich moechte keine binaer-clock. mein SO soll sie auch ablesen koennen/
[15:28] < th> analclock.c
[15:28] < th> hehe
[15:28] < Ge0rG> th: https://morbo.boerde.de/~georg/dbox2/ge0rgs-lcdlib.tar.bz2 - schau ma ob du das kompiliert kriegst
[15:28] < Ge0rG> analclock ist nicht wirklich brauchbar
[15:28] < Ge0rG> https://morbo.boerde.de/~georg/dbox2/digiclock-lucon.tar.gz ist ein fontset für die digiclock ;)
[15:30] < th> powerpc-tuxbox-linux-gnu-gcc: raw.c: No such file or directory
[15:30] < th> ./cdk/apps/funstuff/lcd-savers/raw.c
[15:30] < th> das da?
[15:31] < Ge0rG> hm... das müsste es sein
[15:31] < th> aniplay digiclock
[15:31] < Ge0rG> die lcdlib-sachen hab ich nie ins CVS gespielt.
[15:32] < th> fopen(BMP_FILE) no such...
[15:32] < th> Ge0rG: gib mir mal passende bmps
[15:32] < Ge0rG> 15:28:42 <Ge0rG> https://morbo.boerde.de/~georg/dbox2/digiclock-lucon.tar.gz ist ein fontset für die digiclock ;)
[15:33] < Ge0rG> das hilighten hat gefehlt, stimmts? ;)
[15:33] < th> Ge0rG: jo aber egal
[15:34]   Ge0rG ist jetzt aber wirklich weg.
[15:34] < th> thx Ge0rG
[15:34] < th> Ge0rG: klobig gross aber nett
[15:35]   Ge0rG ist halt kurzsichtig
[15:35] < th> lol
[15:43] -!- Ge0rG is now known as ge0rg
[15:54] < esden> morning
[16:01] < th> was fuer ein netzteil brauch ich fuer 8 scsi festplatten?
[16:02] < huebi> th: ein ganz normales, wenn du die Platten nacheinander anlaufen lassen kannst.
[16:02] < th> wie mach ich das?
[16:02] < huebi> sene unit start cmd - oder so.
[16:02] < th> ich schlachte gerade ein altes 486er gehaeuse... da sollen nur die platten rein
[16:02] < huebi> am controller BIOS laesst sich das einstellen
[16:02] < th> ok
[16:03] < th> ersma das dumme mainboard hier raus
[16:03] < huebi> Quantum Fireball koennen das definitiv nicht.
[16:03] < th> alles ibm
[16:04] < huebi> Da must du dann auch einen Jumper an den Platten setzen.
[16:04] < huebi> IIRC
[16:06] < th> ich braeuchte jetzt metallbaukaesten
[16:06] < huebi> th: CNC-Fraese ist gesser ;-)
[16:06] < huebi> s/g/b/
[16:07] < th> kenn ich nich hab ich nich
[16:10] < th> huebi: hier gibts nen "autostart" jumper
[16:12] < th> und "term pwr en"
[16:12] < huebi> th den nicht setzen. Der Kontroller soll dann einfach das send unit start cmd absetzen.
[16:13] < huebi> term pwr en ist grundsaetzlich immer erst mal gut.
[16:14] < th> was is das?
[16:15] < huebi> Der SCSI Bus muss terminiert werden. das ist der Strom dazu.
[16:15] < esden> hi huebi
[16:15] < esden> *anstubs* ;-)(
[16:16] < th> huebi: ich dacht den wuerd ich mit "active term" terminieren?
[16:17] < huebi> huhu esden
[16:17] < huebi> th: jo. und auch der braucht Strom.
[16:18] < th> hmm
[16:18] < th> das war nicht gesetzt
[16:18] < huebi> th: soll auch nicht.
[16:19] < th> achso
[16:20] < huebi> ftp://ftp.adaptec.digisle.net/obsolete/adaptec/scsiterm.txt
[16:20] < th> muss jetz seinen router runterholen...
[16:20] < huebi> https://support.adaptec-de.com/support/files/miscellaneous.html
[16:20] < th> folglich offline
[16:20] < th> danke huebi
[16:20] < huebi> th gern geschehen.
[16:20] < huebi> esden: ?
[16:20] < th> grmpf. damit haben dbox und krups kein rootfs mehr :-/
[16:21] < th> also alle rechner aus
[16:21] < th> later...
[16:21] < huebi> cu th
[16:23] < esden> ehhm sorry war diffs lesen
[16:23] < esden> huebi: wie fuehlt sich das cdrom laufwerk ? *nerv*
[16:28] < huebi> esden: gut, ist in Orgnung.
[16:29] < esden> huebi: freut mich ... ;-)
[16:29] < huebi> I werde es dann naechste Woch dir zuschicken.
[16:34] < esden> danke ... huebi mein liebster sponsor *GG* ... verbeug ... *knuddel* ;-)
[16:41] < huebi> hmm dvd rippen/encoden geht fast in Echtzeit mit Divx4. Divx5 macht aber leider immer einen core dump
[16:43] < esden> mit welchem ripper ?
[16:44] < huebi> transcode
[16:54] < esden> kenn ich nicht
[16:55] < esden> fuer welches betriebsystem *bloedfrag*
[16:56] < huebi> esden: DOS *g*
[16:57] < huebi> https://www.theorie.physik.uni-goettingen.de/~ostreich/transcode/
[17:01] < esden> dos ... lool
[17:01] < esden> geht es auch auf dosemu ? ;-)
[17:03] -!- owl [~mail-spam@B5aaa.pppool.de] has joined #rocklinux
[17:03] < owl> hi
[17:03] < huebi> esden: Funktioniert ganz gut. Es ist aber ueberhaupt nicht leicht rauszu finden, was alles sonst noch so gebraucht wird. (lame, Divx4...)
[17:04] < huebi> owl: egal ;-)
[17:04] < owl> huebi: du sachst es. ganz deiner meinung.
[17:05] < huebi> owl: Hauptsache: EGAL!
[17:06] < owl> jo.
[17:07] -!- owl is now known as _NULL
[17:14]   _NULL Cannibal Corpse - Hung And Bled
[17:14] < _NULL> yes. that's it!
[17:17] < _NULL> and today / i will kill myself / and today / my heart will stop running / and today / i will leave the world behind me /and today / i will lose you forever / and today, yeah / oh today, yeah / oh, today the world is mine / mother, hold me / hold me tight / i will leave you
[17:20] < esden> hi owl
[17:20] < esden> huebi: hmm ... aber du hast es jetzt unter dos oder dosemu laufen ? *verwirrtsei*
[17:22] < huebi> esden: unter Linux natuerlich
[17:23] < esden> coool ;-)
[17:33] < esden> cu all
[17:35] < huebi> cu esden
[17:50] < _NULL> hat jemand 'ne knarre, damit ich mir mein bloedes gehirn wegpusten kann? wenn ja, dann bitte an meine [adresse_here] senden
[19:16] -!- tsa [~tsa@pD9525344.dip.t-dialin.net] has joined #rocklinux
[19:16] < tsa> tag
[19:17] < _NULL> moin tsa
[19:29] -!- ge0rg is now known as Ge0rG
[19:34] < tsa> soo..
[19:35] < tsa> erstmal wieder ne runde off, futter suchen..
[19:35] -!- tsa is now known as tsa|afk
[20:31] -!- LocalHero [LocalHero@alexanders.lunds.lu.se] has joined #rocklinux
[20:40] < LocalHero> Ahh, at last, all 16 isos in the archive. Anybody have any extra features they would like to se in the iso archive?
[20:42] -!- Kirah [distract@pD9001E49.dip.t-dialin.net] has joined #rocklinux
[20:43] -!- Kirah [distract@pD9001E49.dip.t-dialin.net] has quit (Killed (NickServ (Ghost: Kirah!distract@pD9001E49.dip.t-dialin.net)))
[20:44] -!- Kirah [distract@pD9001E49.dip.t-dialin.net] has joined #rocklinux
[20:51] -!- Kirah[away] [distract@pD9001E74.dip.t-dialin.net] has quit (Read error: 110 (Connection timed out))
[20:58] -!- chrisime [~chrisime@pD9E507C5.dip.t-dialin.net] has joined #rocklinux
[20:58] < chrisime> esden: wie haste du den bsd hinbekommen
[20:58] < chrisime> bei meckert der sich an der ppp.conf eins ab
[20:58] < chrisime> kriegs einfach net hin
[20:59] < chrisime> missing colon dann noch andere nette dinfe
[20:59] < chrisime> dinge
[20:59] < _NULL> moin chrisime
[20:59] < chrisime> jo
[21:06] -!- Mike1 [~mike@odin.informatica.co.cr] has joined #rocklinux
[21:06] < Mike1> Hi all
[21:07] < _NULL> hi Mike1
[21:08] < Mike1> How are you _NULL
[21:08] < Mike1> ?
[21:08] < _NULL> horrible. and you, Mike1?
[21:08] < Mike1> Good as always!
[21:08] < LocalHero> Hello Mike1, you asked about how to get a forum user. Its a new user link on the forum page :)
[21:08] < _NULL> Mike1: uff.
[21:09] < Mike1> LocalHero: hi :)
[21:09] < Mike1> LocalHero: i am going to check it out, also i have some isos from my personal 1.5.17 tree i dunno if you would like to add them
[21:10] < LocalHero> Mike1, sounds interesting :-). I just have to find some more harddisk space first :). Im out of it :(. Maybe i will go and buy a 80gb in next week but right now i dont have that much money (student)
[21:13] < Mike1> LocalHero: perhaps i can upload it over here untill you get a hard drive
[21:13] < Mike1> my connection isnt as fast as yours but it will work ok
[21:14] < LocalHero> Mike1, that will work. You only have to specify the url. Well, uhm, i have to change some things in the script first so that the file size funtion works :). But we will give it a try :)
[21:15] < LocalHero> If you create a forum user i can make it admin
[21:15] < Mike1> thanks i am going to have a look at the forum stuff now
[21:25] < LocalHero> Mike1, ok, you have the admin page at https://194.47.210.193/admin.php
[21:26] < LocalHero> Mike1, dont mess it all up ;).. Be carefull when you create menus so that we keep a good structure
[21:27] < Mike1> LocalHero: dont worry i wont fuck it up :)
[21:27] < Mike1> BTW thanks for the account
[21:27] < Kirah> mike
[21:27] < Kirah> hey :)
[21:28] < Mike1> hi Kirah
[21:28] < Mike1> LocalHero: would you mind if try adding some of my isos?
[21:28] < Mike1> i mean URLs for them
[21:29] < Kirah> mike, how are you?
[21:29] < Mike1> Kirah: i am very good, and yourself?
[21:29] < Kirah> nice to hear that :) yes i am good today
[21:29] < LocalHero> Mike1, sure, thats a great ide. But i can upload it to my ftp right now. But if you have a different location its ok :)
[21:30] < LocalHero> Mike1, as long as we keep a good structure on the menu i think we should add as much as possible
[21:30] < Mike1> LocalHero: i thought you said you didnr have to much space
[21:31] < LocalHero> Mike1, well i have about 600 mb free. But adding them to the page doesnt mean that it must be on my ftp. If you can have it on your server for a while you just enter that link in the admin part
[21:32] < Mike1> LocalHero: ok thats what i will do i have some GB available :)
[21:33] < LocalHero> Mike1, great, just tell me if you dont understand the admin pages. And how i can make them better :)
[21:33] < Mike1> One improvement could be to add a link to browse the forum archive
[21:33] < Mike1> :)
[21:37] < LocalHero> Mike1, ok, on the main page. Every iso has its own forum right now. I thought it should be a small discussion about problems and features of that iso
[21:37] < LocalHero> Mike1, but you might mean something else
[21:38] -!- _NULL [~mail-spam@B5aaa.pppool.de] has quit (Read error: 104 (Connection reset by peer))
[21:39] < Mike1> no you are right :)
[21:41] < Mike1> LocalHero: Fatal error: Cannot redeclare class c_iso in /storage/www/iso.rocklinux.org/c_iso.php on line 2  ????
[21:43] < LocalHero> Mike1, yupp, sorry, im editing that file now, it should be ok now :)
[21:43] < LocalHero> Mike1, my mistake
[21:43] < Mike1> LocalHero: yes it works now
[21:43] < Mike1> so now you 2 isos on the 1.5.17 tree :)
[21:43] < Mike1> but the size thing doesnt work
[21:47] < LocalHero> Mike1, hmm, thats because i made an easy solution for it that said that everything is on my server. better fix it :)
[21:47] < Mike1> hehe yup
[21:48] < Mike1> LocalHero: i will add my my 1.5.12 sparc isos, is that ok with you?
[21:48] < LocalHero> Mike1,Great :) ok, wouldnt it be nice to know the main benefits of your tree or something :)
[21:48] < LocalHero> Mike1, no problem :).. Uhm, just need to add the sparc in the drop down button on arch
[21:48] -!- Kirah is now known as ungeil_ass
[21:49] < LocalHero> Mike1, should i label it Sparc. Dont know much about them? Do they want any special optimation and so on :)
[21:49] < Mike1> LocalHero: just add Sparc and Sparc64
[21:50] < LocalHero> Mike1, done :).
[21:50] < Mike1> LocalHero: optimizations well....
[21:51] < Mike1> for Sparc ty Sparc v7 and Sparc v8
[21:51] -!- owl [~mail-spam@B540a.pppool.de] has joined #rocklinux
[21:52] < LocalHero> ok. I dont know much about sparc but i will add "ty" "v7" "v8" :)
[21:52] < owl> re
[21:52] < Mike1> And i guess to avoid problems rename Sparc64 --> Ultrasparc, the only optimizations for it at the moment is Sparc v9
[21:52] -!- owl is now known as _NULL
[21:52] < Mike1> re owl
[21:54] < LocalHero> Mike1, ok is that correct?
[21:55] < Mike1> LocalHero: Arch= Sparc , Optim= Sparc v7 and Sparc v8
[21:55] -!- Ge0rG [georg@op-co.de] has quit (Remote closed the connection)
[21:55] -!- Ge0rG [georg@op-co.de] has joined #rocklinux
[21:55] < Mike1> and Arch=Ultrasparc Optim= Sparc v9
[21:55] < Mike1> thats it :)
[21:56] < Mike1> Maybe you would like to add Arch Power PC and Alpha
[21:56] -!- ungeil_ass is now known as Kirah
[21:57] < Mike1> there are no optimizations for PowerPC but there A LOT for Alpha
[21:57] < LocalHero> Mike1, i think i have one for alpha, but none for powerpc
[21:58] < LocalHero> I will add it now :).. Better wait with the optim untill i get in tuch with someone who knows that platform :)
[21:58] < Mike1> LocalHero: i do a little bit
[21:59] < Mike1> Here are the optimizations we have for alpha:
[21:59] < LocalHero> Mike1, ok great :)
[22:00] < LocalHero> I have checked the size thing. ok, it seams like php doesnt have support for checking size on http links :(. So it has to be on a ftp server to get the size
[22:00] < Mike1> Alcor/Alpha-XLT , Alpha-XL , AlphaBook1, Avanti , Cabriolet , DP264 , EB 164 ...
[22:01] < Mike1> EB64+ , EB66 , EB66+ , Eiger , Jensen , KX164 , Miata , Mikasa , Nautilus , Noname , Noritake ...
[22:04] < LocalHero> Mike1, wow, that many :=
[22:06] < Mike1> PC164 , Platform200 , Rawhide , Ruffian , RX164 , SX164 , Sable , Shark , Takara Titan , Wildfire.
[22:06] < Mike1> just those few ones *grin*
[22:12] < Mike1> LocalHero: yes i know there are TOO many
[22:12] < Mike1> :)
[22:13] < LocalHero> Mike1, wow, ok, i think i have all now :)
[22:14] < Mike1> LocalHero: yes you do
[22:15] < Mike1> you already took care of the optimizations on Intel right?
[22:18] -!- tsa [~tsa@pD9525344.dip.t-dialin.net] has joined #rocklinux
[22:18] -!- tsa [~tsa@pD9525344.dip.t-dialin.net] has quit (Client Quit)
[22:19] -!- tsa|afk is now known as tsa
[22:19] < tsa> re
[22:19] < Mike1> hi tsa
[22:20] < LocalHero> Mike1, well, I cant think of any other. Maybe i should add AMD k6 but i dont know if anybody uses that?
[22:20] < tsa> hi Mike1
[22:21] < Mike1> LocalHero: advantages of using my tree well i update packages and stuff before even it is modified on the cvs tree
[22:21] < LocalHero> Mike1, but please feel free to add your sparc isos :).. I mean, why have an iso archive if you dont have isos on it. When it gets to big i might start cleaning out big isos but right now i would love some for other archs then intel
[22:22] < Mike1> :)
[22:22] < LocalHero> Mike1, oki, nice :)
[22:22] < Mike1> just for you yo keep it in mind the current optimization on intel are: i386, i486, i586, i686, k6 and k7
[22:22] < LocalHero> Mike1, oki then i need k6 to :)
[22:23] < Mike1> LocalHero: all the optimizations i have givent to are based on the 1.5 three as we dont have iso of 1.7 yet
[22:23] < Mike1> LocalHero: i dunno if there are any but its nice to have all the archs and optimizations according to the source :)
[22:23] < LocalHero> Mike1, well, i mean, if something is missing you can tell me any time :)
[22:24] < LocalHero> Mike1, yupp :)
[22:24] < Mike1> ok but i think you are doing a great job :)
[22:25] < LocalHero> Mike1, thanx :=
[22:25] < LocalHero> :)
[22:25] < Mike1> regarding adding iso.rocklinyx.org send a mail to clifford@clifford.at regarding this
[22:26] < Mike1> s/y/u
[22:26] < LocalHero> Mike1, i have spooken to him and there seams to be a problem with that it is his former employer. He gets it for free and he doesnt want to remind him of that so that he have to start to pay :)
[22:27] < LocalHero> Mike1, but i have asked him if it shouldnt be avaible on the getting rocklinux page or something
[22:28] < Mike1> LocalHero: i own the domain hack-solutions.com if you want i can do somthing like rocklinux.hack-solutions.com for you
[22:28] < Mike1> or you could play with dyndns.org
[22:35] < LocalHero> Mike1, well, when i get my permanent ip i will add it to dyndns.org ore something :). Thanx anyway :)
[22:35] < Mike1> LocalHero: no problem i'm just trying to help :)
[22:36] < tsa> .oO( nothing.sucks.like.dyndns.org ;-)
[22:36] < Mike1> tsa: any suggestions?
[22:37] < tsa> no ideas...
[22:37] < tsa> download2.rocklinux.de perhaps..
[22:37] < tsa> whatever..
[22:37] < Mike1> tsa: true
[22:37] < Mike1> LocalHero: how doe sthat sound for you?
[22:39] < LocalHero> Mike1, download2.rocklinux.de, sounds nice :).. But wouldnt iso.rocklinux.de be nicer :). Or i could add both :)
[22:39] < Mike1> LocalHero: sure talk to SMP about it :)
[22:39] < LocalHero> Mike1, what webbrowser did you use?
[22:40] < Mike1> Mozilla why?
[22:40] < LocalHero> Mike1, just want to know witch browser it works for. You know, html is not the easiest language to get to work on every browser :)
[22:41] < Mike1> yes :)
[22:41] < [anders]> LocalHero: for a simple reason, they browser writers don't stick to standards..
[22:41] < [anders]> s,they,the,
[22:41] < Mike1> hi [anders] :)
[22:41] < Mike1> great to see you around my friend
[22:41] < [anders]> yo Mike1  :) How's things? :)
[22:42] < Mike1> [anders]: everything great, looking forward to have your private tree with gnome2 and evolutions stuff
[22:42]   [anders] uses Opera6 for linux, Netscape 6.2 and Netscape 4.78
[22:42] < Mike1> :)
[22:42] < LocalHero> [anders], yupp i know :)
[22:42] < [anders]> Mike1: that is when I can get is working... ;-)
[22:42] < [anders]> LocalHero: seen the snapshots then.. :-D
[22:43] < [anders]> s,is,it,
[22:43] < [anders]> Mike1: Evolution is proving to be a right pain in the a** to be perfectly honest.
[22:43] < Mike1> [anders]: my current "private tree brakes some packages because they need newer versions of gnome than the one currently have on cvs
[22:43] -!- tsa_ [~tsa@pD952505A.dip.t-dialin.net] has joined #rocklinux
[22:43] < tsa_> grrr.
[22:43] < Mike1> [anders]: yes i know but you like those kind of things dont you?
[22:43] < [anders]> The dependencies for it is astonishing and even with satisfied deps, the damned thing doesn't build..
[22:43] -!- tsa [~tsa@pD9525344.dip.t-dialin.net] has quit (Killed (NickServ (Ghost: tsa_!~tsa@pD952505A.dip.t-dialin.net)))
[22:43] < [anders]> moin tsa_ , wazzup?
[22:43] -!- tsa_ is now known as tsa
[22:44] < tsa> [anders]:
[22:44] < [anders]> Mike1: In a way I do.. A little bit of troubleshooting is nice, the abiword ext is not so nice..
[22:44] < tsa> Jul 27 22:41:56 azathoth pppd[2188]: No response to 4 echo-requests
[22:44] < tsa> Jul 27 22:41:56 azathoth pppd[2188]: Serial link appears to be disconnected.
[22:44] < tsa> Jul 27 22:41:56 azathoth pppd[2188]: Connection terminated.
[22:44]   Mike1 creating a new private tree for him self :)
[22:44] < tsa> damn dsl connection..
[22:45] < Mike1> [anders]: why whats going on with abiword?
[22:45] < [anders]> tsa: Ah, dsl provider issues.. How lovely.. I understand your situation.. My provider seems to be a bit better..
[22:45] < tsa> hehe
[22:45] < LocalHero> [anders], well i have downloaded the 1.5.16 but now my disk is full :(. I can only support about 16 isos right now. Need to get more harddrive. But im a bit low on cach (student)
[22:45]   Mike1 has been to busy to dig into ext build
[22:45] < tsa> should speak to my boss about a 2mbit x.21 line ;-)
[22:46] < [anders]> Mike1: Well, I tried to build it, ran in to problems, tried to fix it, then gave up. To complex.. the abiword extention downloads six or seven files and builds.. Some are duplicated in other packages for example..
[22:46] < LocalHero> tsa, move to a student location, i got 100mbps right in the wall :)
[22:46] < [anders]> LocalHero: you have the bandwidth but not the disk, I have the disk but not the bandwidth (providing I can get the USB2 stuff in 2.4.19 working..)
[22:46] < Mike1> LocalHero: maybe you could try to get some sponsors for the ROCK project over there as in pr work, to try to get hard drives
[22:47]   [anders] is tidying up around the house as the gf is out with a friend partying..
[22:48] < LocalHero> Mike1, thats true. hmm, how do you do that. Just call ibm and say that im a rock developer and needs harddrives :)
[22:48] < Mike1> something like that
[22:48] < Mike1> perhaps you can get clifford to give some references or something
[22:48] < Mike1> and ask (beg) for stuff
[22:49] < LocalHero> [anders], hehe :)... But you can link them from your site, if you want an admin account on the iso archive
[22:49] < Mike1> cds, hd's anything that may be usefull :)
[22:49] < LocalHero> Mike1, thats true. Well, i should check when i come home, right now im visiting my dad ;)
[22:49] < Mike1> sure LocalHero :)
[22:52]   [anders] works at IBM in the SSG department.. SSG = Serial Storage Group
[22:53] < [anders]> That doesn't mean I can give away free stuff though..
[22:53] < tsa> hehe
[22:53] < Mike1> [anders]: but maybe you have some contacts are key people LocalHero could talk to
[22:53] < Mike1> :)
[22:53] < [anders]> I only contract for them and this group develops things in relation to storage.. SSG Hursley wrote SSA and maintains it..
[22:54] < [anders]> Mike1: I know of no sales-people in IBM and I prefer to keep it that way... :)
[22:54] < Mike1> [anders]: hehe ok :)
[22:54]   [anders] and sales bods doesn't gel hugely well..
[22:55] < [anders]> I have worked with and tried to fix things sales guys promised would work and anybody in their right mind would have upfront said it would not work...
[22:55] < LocalHero> [anders], wow, then you must have huge hard drives :)
[22:56] < [anders]> I also know a fair few people (aka work/worked with) that worked in the AIX Support Centre..
[22:57] < LocalHero> [anders], where you from sweden? Never got that right. Du kunde ju lite svenska :)
[22:57] < [anders]> LocalHero: Let me put it like this, the product we are working on right now will quite happily serve you a single LUN in the terabyte range if you have adequate backend storage attached.. We have fibrechannel drawers with 15 72GB disks in each.. My teststand have three drawers...
[22:58] < [anders]> LocalHero: Jag pratar svenska flytande eftersom jag var född och växte up i Hallstahammar.. :)
[22:58] < [anders]> upp t.o.m
[22:58] < LocalHero> [anders], cool, haha lite häftigt, oki, hmm, but i dont think people like if we speak swedish
[22:59] < [anders]> LocalHero: tja, de brukar ju snacka tyska ibland och man får påminna dem att språket i kanalen ska vara en_US.. ;-)
[22:59] < [anders]> Right, english it is.. :)
[23:00] < LocalHero> [anders], did you want an admin account on the site so that you can add the remaining of your isos? I mean they can be linked to your website like Mike1 has done
[23:02] < [anders]> LocalHero: uhm.. well, until I am completely happy with my box, perhaps not.. I will over the next month bounce the box from time to time when I try to get a 2.4.19 kernel running..
[23:02] < LocalHero> [anders], oki, then we better not add them :)
[23:03] < [anders]> Not yet anyway.. Once I have the box running the level of code I am happy with, I don't mind adding the links..
[23:03] < LocalHero> Hehe, oki :)
[23:04] < [anders]> What bugs me is that 2.4.19-rc3-ac3 boots and runs on my laptop (P-III 750MHz) no problem, but on my shuttle (XP1900+ Athlon) now way. Locks solid even before it gets to loading the initrd..
[23:04] < LocalHero> [anders], sounds strange, well i need to go now, cya all l8er. Bye
[23:05] < [anders]> cya LocalHero..
[23:05] -!- LocalHero [LocalHero@alexanders.lunds.lu.se] has quit ()
[23:06] < [anders]> Mmmm.. Lund.. Nice quiet place..
[23:07] < th> wieviel zum henker ist denn auf so einer 1.5.16 CD drauf.... staun
[23:07] < th> 1747 MB
[23:07] < th> wow
[23:07] < _NULL> hi th
[23:07] < th> hi _NULL
[23:07] < [anders]> th: you making bootable DVD's or something?
[23:08] < [anders]> moin th
[23:08] < [anders]> moin _NULL
[23:08] < th> [anders]: nope. just extracting each base-pkg from that 1.5.16 cd
[23:08] < _NULL> moin [anders]
[23:08] < [anders]> th: and the ISO is 1.7GB ?
[23:08] < th> [anders]: no
[23:09] < th> [anders]: the iso fits on a cdrom
[23:09] < th> [anders]: but it extracts to 1.7GB
[23:09] < [anders]> mmhmmm.. so what is it that is "22:07 < th> 1747 MB" :)
[23:09] < th> it extracts to 1.7GB
[23:10] < [anders]> Aaahh.. Fully installed base+opt = 1.7GB..
[23:10] < th> it's bzip2 compressed
[23:10] < th> i just did a tar xfI foreach tbz2
[23:11] < [anders]> yeah.. I'd expect that soon a base+opt installed ROCK system will take up ~2.5GB
[23:13] < [anders]> More things will move into base as people will want both kde and gnome in base.. Perhaps they both should be in the ext section..
[23:16]   [anders] wishes he could write a nice multi-CD installer for ROCK.. Something that would happily install from across two or three CD's....
[23:18] < th> [anders]: well it's just extracting tbz2
[23:20] < [anders]> th: it is not always that simple.. I want an install system that tracks dependencies.. If you select Evolution, you will need the right gnome packages and it will tell you this and offer the option of auto-selecting them..
[23:21] < th> hmm
[23:23] < [anders]> and it has to be able to cope with packages that is on any of the other CD's in the pack..
[23:24] < [anders]> I know IBM sorted this once when they were moving from AIX 4.1 which was on one CD only, to AIX 4.2 that was on two CD's and then AIX 4.3 that spanned three CD's.. So they had to solve the problem..
[23:24] < [anders]> I think that what they did was that they had a .toc on each CD which contained a list of all file-sets in the entire release..
[23:25] < chrisime> hmpf
[23:26] < chrisime> where's esden
[23:26] < [anders]> ich weiß nicht..
[23:27] < [anders]> hmm.. weiß is white, isn't it..
[23:29] < tsa> yes.
[23:29] < tsa> but "ich weiss" = "i know"
[23:29] < [anders]> I thought ß == ss ?
[23:29] < tsa> yes.
[23:30] < tsa> <- using us keyboard layout
[23:30] < [anders]> so 'ich weiss' == 'ich weiß' ?
[23:30] < tsa> yes
[23:30] < chrisime> ich hab kein sz (scharfes s)
[23:30] < tsa> i'm not using this äöüß stuff anymore
[23:30] < chrisime> uskeymap
[23:31] < [anders]> tsa: use these settings in X and you get compose keys to do it for you.. :)
[23:31] < [anders]>         Option      "XkbRules" "xfree86"
[23:31] < [anders]>         Option      "XkbModel" "pc104"
[23:31] < [anders]>         Option      "XkbLayout" "en_US"
[23:31] < [anders]>         Option      "XkbVariant" "pc104"
[23:31] < [anders]> AltGr + s = ß
[23:31] < tsa> ah, i see. thanks
[23:32] < [anders]> that does it for me.. I then use xmodmap to map in åäö to fast keys.. :)
[23:36] < chrisime> nice
[23:36]   chrisime adds
[23:37]   [anders] uses a Happy Hacking US layout kbd at work..
[23:38] < chrisime> what is ddc again
[23:38] < chrisime> in xf86config
[23:38]   [anders] has no idea..
[23:46] < Mike1> Anyone has an updated list of orphan extensions?
[23:48] < tsa> Mike1: uhm..no. what do you have in mind?
[23:50] < tsa> ..and for which tree?
[23:50] < tsa> 1.5? 1.7?
[23:50] < Mike1> tsa: i'm doing my personal 1.5.17 tree on which i removed kde from the base to add some extensions i need, but while i was working around i found that some extensions are very out of date, and i though of jumping over a few ones if they are free
[23:50] < Mike1> tsa: 1.5 tree
[23:50] < tsa> ah, i see.
[23:50] < tsa> no idea, you should ask huebi
[23:50] < Mike1> eg. Acroread
[23:51] < Mike1> BTW is are all Bevin ext packages taken?
[23:51] < tsa> dunno. -> grep
[23:51] < Mike1> Acroread is Bevins thats why i ask
[23:51] < Mike1> :)
[23:51] < tsa> ah, ok.
[23:52] < Mike1> anyways i will ask huebi
[23:52]   _NULL sunday -> changing ISP
[23:52] -!- _NULL [~mail-spam@B540a.pppool.de] has quit ("reconnect")
[23:52] < Mike1> huebi: you here?
[23:53] -!- _NULL [~mail-spam@dialin-212-144-165-069.arcor-ip.net] has joined #rocklinux
[23:53] < tsa> currently in cvs
[23:53] < tsa> # [M] G.Bevin gbevin@theleaf.be
[23:53] < _NULL> re
[23:53] < Mike1> tsa: yes i know
[23:53] < tsa> and wrong description
[23:53] < Mike1> re _NULL
[23:53] < tsa> (desc is from fidelio)
[23:53] < tsa> ;-)
[23:53] < Mike1> tsa: yes ver oyut of date and with Fidelios desc
[23:54] < Mike1> yup
[23:54] < tsa> Mike1: do you have cvs access to the 1.5 tree?
[23:54] < Mike1> tsa: yes i do :)
[23:54] < tsa> Mike1: then, it's pretty ease.
[23:54]   Mike1 has write access
[23:54] < tsa> s,e,y,
[23:54] < tsa> ok, fine.
[23:55] < tsa> do a cvs checkout, update the package, fix the description and change [M] to yourself
[23:55] < Mike1> still i will ask huebi just in case
[23:55] < tsa> hehe, ok.
[23:56] -!- WKaibigan [~Aloicious@ACB4EF97.ipt.aol.com] has joined #rocklinux
[23:56] < [anders]> moin WKaibigan
[23:56] < Mike1> hello WKaibigan
[23:56] < WKaibigan> Hi there.
[23:56] < tsa> hi WKaibigan
[23:56] < th> tsa: you forget something
[23:57] < th> s,get,got,
[23:57] < tsa> th: hm?
[23:57] < tsa> submitting the changes to cvs? ;-)
[23:57] < WKaibigan> Just been looking at the VIA Eden motherboard. It is sweet. Very small and, Linux compatable.
[23:57] < th> tsa: and what has to be done just before committing?
[23:57] < tsa> build-index...
[23:57] < th> tsa: full ack
[23:57] < tsa> i know.
[23:57] < th> WKaibigan: url?
[23:57] < Mike1> th: :)
[23:58] < WKaibigan> https://www.silentpcreview.com/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=17&page=1
[23:58] < Mike1> th so i would have to ci ext-config/INDEX.1.5 too ?
[23:58] < th> Mike1: ack
[23:59] < Mike1> th danke :)
[23:59] < tsa> hehe.
[23:59] < tsa> channel getting germanized.. ;-)
-!- Irrsi  Log closed Sun Jul 28 00:00:00 2002